Bosch Dishwasher Error Codes: Full List & Meanings
Every Bosch dishwasher error code we have verified against Bosch's own support pages, with its official meaning. Codes vary by model, so confirm in your owner's manual. Support: Bosch Customer Support: 1-800-944-2904.
Codes by system
Leak protection
Heating
Water fill
Drain
Power supply
All Bosch dishwasher error codes
Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.
| Code | Official meaning | System | Owner action |
|---|---|---|---|
| E15 | The safety switch has detected water in the base of the dishwasher, so the leakage protection system has activated. Also: E3100 | Leak protection | Owner checks |
| E12 | Limescale has built up in the heat pump, and the dishwasher needs descaling. Also: E2060 | Heating | Owner checks |
| E14 | Bosch lists E14 as a flow meter failure or a problem with water flowing into the dishwasher or the fill system. Also: E3000 | Water fill | Owner checks |
| E16 | There is a problem with water flowing into the dishwasher or the fill system, so water may not be able to enter. Also: E17 | Water fill | Owner checks |
| E18 | Water flow into the dishwasher is a problem: the water level is too low or water is not being pumped correctly. Also: E3200 | Water fill | Owner checks |
| E22 | The dishwasher filter is blocked. Also: E9240 | Drain | Owner checks |
| E23 | There is a problem with the drain pump: it is blocked, clogged or faulty. Also: E6101 | Drain | Owner checks |
| E24 | The dishwasher is not draining properly because the drain filter is blocked. Also: E6103 | Drain | Owner checks |
| E25 | The drain pump is blocked, or the drain pump cover is loose or missing. Also: E6102 | Drain | Owner checks |
| E27 | The house power supply to the dishwasher is too low. Also: E9001 | Power supply | Owner checks |
| E01 | Bosch lists E01 as: heat pump motor circuit fault at the main control board. Also: E0100 | Control / electronics | Reset only |
| E02 | Bosch lists E02 as: main control board relay fault. | Control / electronics | Reset only |
| E03 | Bosch lists E03 as: main control board relay fault. Also: E0103, E0107 | Control / electronics | Reset only |
| E04 | Bosch lists E04 as: faulty heater electronics detected in self-test. Also: E0105 | Control / electronics | Service |
| E05 | Bosch lists E05 as: wash arm diverter circuit fault. Also: E0106 | Control / electronics | Reset only |
| E06 | Bosch lists E06 as: door sensor circuit fault. Also: E8000 | Control / electronics | Reset only |
| E07 | Bosch lists E07 as: Zeolite (Crystal Dry) fan motor defective. Also: E2130 | Control / electronics | Reset only |
| E09 | Bosch lists E09 as: heat pump internal heater fault. Also: E2030, E6001 | Control / electronics | Reset only |
| E10 | Bosch lists E10 as: Zeolite (Crystal Dry) chamber heater fault. Also: E2120 | Control / electronics | Reset only |
| E19 | Bosch lists E19 as: detergent dispenser solenoid circuit fault. Also: E6900 | Control / electronics | Reset only |
| E20 | Bosch lists E20 as: heat pump internal heater fault. | Control / electronics | Reset only |
| E21 | Bosch lists E21 as: heat pump blocked. Also: E6002 | Control / electronics | Reset only |
| E0110 | Bosch lists E0110 as: electronics miscommunication. | Control / electronics | Service |
| E6160 | Bosch lists E6160 as: PowerControl lower spray arm reference position not found. | Control / electronics | Service |
Symptoms
Sources
- Bosch Home US: Dishwasher Error Codes (official)
- Bosch Home US: E15 Bosch Dishwasher Error Code (official)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Bosch.