Dacor Range Error Code F0: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Dacor range error code F0 means: Clock button on the key panel is stuck. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Dacor range error-code chart, via Sears PartsDirect [1].

Quick facts

Code	F0
Also shown as	None listed by the manufacturer
Brand / appliance	Dacor range
System	Control / electronics
Meaning (service chart)	Clock button on the key panel is stuck. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	Dacor customer support (see your owner's manual)
Source document	Dacor range error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F0 means on a Dacor range

Clock button on the key panel is stuck. [1]

This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Dacor range error code F0 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Dacor range error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (F0) and copy the full model number from the rating label, so you can confirm this chart applies to your range and order the right parts.
Check the control lock. Press the Clock button to free it.
Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
Test and decide. Run a short cycle or restart and watch the display. If F0 comes back after these checks, stop using the range for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Dacor range error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Control key panel

When to call a technician

If it remains stuck, a technician should replace the control key panel.
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Dacor customer support (see your owner's manual) first

Frequently asked questions

What does error code F0 mean on a Dacor range?

The Dacor range error-code chart lists F0 as follows: Clock button on the key panel is stuck.

Is it safe to keep using the range with F0?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Dacor range error F0 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Dacor customer support (see your owner's manual).

Sources

Sears PartsDirect: Dacor range error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Dacor.