Electrolux Dishwasher (service chart) Error Codes: Full List & Meanings

Every Electrolux dishwasher (service chart) error code in the Electrolux dishwasher error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Electrolux support (owner.electrolux.com).

Codes by system

Leak protection

All Electrolux dishwasher (service chart) error codes

Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.

Code	Meaning	System	Owner action
Er-01	Water leak detected. A sensor under the dishwasher detected a leak.	Leak protection	Owner checks
Er-02	Thermistor/turbidity sensor failure.	Heating	Service
Er-03	Wash motor failure.	Motor / drive	Service
Er-04	Upper fan/vent failure. Also: Er-05	Venting / airflow	Service
Er-06	Lower fan failure.	Venting / airflow	Service
Er-07	Drain valve failure. Also: Er-11	Drain	Service
Er-08	User interface control failure. A switch on the user interface is defective.	Control / electronics	Service
Er-09	Communication failure between the user interface control and the electronic control board.	Control / electronics	Service
Er-10	Electronic control board relay failure. A relay on the electronic control board failed.	Control / electronics	Service
Er-12	Drain valve position error. The drain valve activated when it should be off.	Drain	Reset only
Er-13	Electronic control board failure. The electronic controlled board has an internal component failure.	Control / electronics	Service

Symptoms

Sources

Sears PartsDirect: Electrolux dishwasher error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Electrolux.