ErrorCodePro · Appliance Error CodesElectrolux Induction cooktop Error Codes: Full List & Meanings
Every Electrolux induction cooktop error code in the Electrolux induction cooktop error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Electrolux support (owner.electrolux.com).
Codes by system
All Electrolux induction cooktop error codes
Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.
| Code | Meaning | System | Owner action |
|---|---|---|---|
| 2 | Left front element Down key is defective. | Heating | Reset only |
| 3 | Left front element Up key is defective. | Heating | Reset only |
| 4 | Left front element On/Off key is defective. | Heating | Reset only |
| 6 | Left rear element Down key is defective. | Heating | Reset only |
| 7 | Left rear element Up key is defective. | Heating | Reset only |
| 8 | Left rear element On/Off key is defective. | Heating | Reset only |
| 10 | Right rear element Down key is defective. | Heating | Reset only |
| 11 | Right rear element Up key is defective. | Heating | Reset only |
| 12 | Right rear element On/Off key is defective. | Heating | Reset only |
| 14 | Right front element Down key is defective. | Heating | Reset only |
| 15 | Right front element Up key is defective. | Heating | Reset only |
| 16 | Right front element On/Off key is defective. | Heating | Reset only |
| 21 | Timer Down key is defective. | Control / electronics | Reset only |
| 22 | Timer Up key is defective. | Control / electronics | Reset only |
| 23 | Warm (Keep Warm) key is defective. | Control / electronics | Reset only |
| 24 | Lock key is defective. | Door / lock | Reset only |
| 25 | Power (Main Power) key is defective. | Power supply | Reset only |
| 30 | Improper power supply (high voltage) or internal wiring failure. | Power supply | Reset only |
| 31 | Power Level Failure. | Power supply | Reset only |
| 32 | Low voltage output from the 12-volt power supply on the filter control board. | Power supply | Reset only |
| 33 | Improper voltage output from the filter control board. | Power supply | Reset only |
| 34 | Communication failure between the filter control board and the main power control board. | Power supply | Reset only |
| 35 | Improper power supply voltage (low voltage) or failed wiring connections. | Power supply | Reset only |
| 36 | Communication error between the main power control board and the filter control board. | Power supply | Reset only |
| 39 | Touch control board software incompatible with the filter control board after a new touch control board is installed. | Control / electronics | Reset only |
| 40 | Communication error between the main power control board and the filter control board. | Power supply | Reset only |
| 51 | Left front temperature sensor failure. | Heating | Reset only |
| 52 | Left rear temperature sensor failure. | Heating | Reset only |
| 53 | Right rear temperature sensor failure. | Heating | Reset only |
| 54 | Right front temperature sensor failure. | Heating | Reset only |
| H in the display when element off and cold | Element temperature sensor is defective. | Heating | Reset only |
| Multiple codes | Disconnected wires. | Control / electronics | Reset only |
Symptoms
Sources
- Sears PartsDirect: Electrolux induction cooktop error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Electrolux.