ErrorCodePro · Appliance Error CodesFrigidaire Digital display model front-load washer Error Code E21: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Frigidaire digital display model front-load washer error code E21 means: Drains slowly. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Frigidaire digital display model front-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | E21 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Frigidaire digital display model front-load washer |
| System | Drain |
| Meaning (service chart) | Drains slowly. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Frigidaire support (owner.frigidaire.com) |
| Source document | Frigidaire digital display model front-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code E21 means on a Frigidaire digital display model front-load washer
Drains slowly. [1]
This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Frigidaire digital display model front-load washer error code E21 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (E21) and copy the full model number from the rating label, so you can confirm this chart applies to your digital display model front-load washer and order the right parts.
- Check the drain hose. Check your house's washer drain and the washer's drain hose for clogs and clear any clogs found.
- Do a power reset. Unplug the washer and check the drain pump for a clog.
- Test and decide. Run a short cycle or restart and watch the display. If E21 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Frigidaire digital display model front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Drain pump
When to call a technician
- If the drain path is clear, the drain pump usually needs replacing.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first
Related error codes
Frequently asked questions
What does error code E21 mean on a Frigidaire digital display model front-load washer?
The Frigidaire digital display model front-load washer error-code chart lists E21 as follows: Drains slowly.
Is it safe to keep using the digital display model front-load washer with E21?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Frigidaire digital display model front-load washer error E21 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).
Sources
- Sears PartsDirect: Frigidaire digital display model front-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.