ErrorCodePro · Appliance Error CodesGE Dishwasher (service chart) Error Codes: Full List & Meanings
Every GE dishwasher (service chart) error code in the GE dishwasher error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: GE Appliances support (products.geappliances.com).
Codes by system
Drain
Control / electronics
All GE dishwasher (service chart) error codes
Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.
| Code | Meaning | System | Owner action |
|---|---|---|---|
| F2 | Communication failure between the user interface control and the electronic control board. | Control / electronics | Service |
| F3 | Inverter control board configuration error. | Control / electronics | Service |
| F5 | Inverter control board communication failure. | Control / electronics | Service |
| F16 | High water temperature. | Heating | Service |
| F33 | Door switch failure. | Door / lock | Service |
| F34 | Water leak detected. | Leak protection | Reset only |
| F35 | Diverter feedback error. | Control / electronics | Service |
| F48, F49 | Turbidity sensor failure. Also: F52 | Sensors | Service |
| F50 | Temperature sensor failure. Also: F51 | Heating | Service |
| F64 | Invertor error. | Control / electronics | Service |
| F65 | No water detected by the inverter control board. | Control / electronics | Service |
| F80 | No water detected by the turbidity sensor. Also: F96 | Sensors | Service |
| F97 | Heater failure. | Heating | Service |
| F98 | Not draining. The drain pump wire harness has an internal thermal cut-off fuse. | Drain | Owner checks |
| F99 | Minimum wash temperature not met. | Heating | Service |
| F112 | Stuck key pad button. | Control / electronics | Owner checks |
| F128 | Low rinse agent level. | Water fill | Service |
| F144 | Inverter control board failure. | Control / electronics | Service |
| F145 | Inverter control board not getting AC power. The inverter control board power wire harness has an internal thermal cut-off fuse. | Power supply | Service |
| F146 | Circulation pump failure. The circulation pump wire harness has an internal thermal cut-off fuse. | Control / electronics | Service |
| F147 | Drain pump failure. The drain pump wire harness has an internal thermal cut-off fuse. | Drain | Service |
| F148 | Wire harness thermal cut-off fuse is blown. The drain pump and circulation pump wire harnesses contain thermal cut-off fuses. | Drain | Service |
| F149 | Inverter control board wire harness failure. The inverter control board power wire harness contains a thermal cut-off fuse. | Control / electronics | Service |
Symptoms
Sources
- Sears PartsDirect: GE dishwasher error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.