GE Dishwasher Error Code C5: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

GE dishwasher error code C5 means: The pump-out time was too short. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check the water supply.

Quick facts

Code	C5
Also shown as	None listed by the manufacturer
Brand / appliance	GE dishwasher
System	Water fill
Official meaning	The pump-out time was too short. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	GE Appliances service

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code C5 means on a GE dishwasher

The pump-out time was too short. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix GE dishwasher error code C5 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on GE's published guidance [1], rewritten for clarity.

Check the water supply. Make sure the water supply is on.
Retry. Run the same cycle again.
Free the float. Tap the float cover at the front left of the tub floor.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact GE Appliances service first

Frequently asked questions

What does error code C5 mean on a GE dishwasher?

GE lists C5 as follows: The pump-out time was too short.

Is it safe to keep using the dishwasher with C5?

Not until the cause is fixed.

Can I fix GE dishwasher error C5 myself?

Only with the owner checks on this page, starting with: check the water supply. If it persists, call a technician or GE Appliances service.

Sources

GE Appliances: Dishwasher Error, Fault or Function Codes (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.