ErrorCodePro · Appliance Error CodesGE Electronic-controlled refrigerator Error Code PF: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
GE Electronic-controlled refrigerator error code PF means: Power has been interrupted. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: GE electronic-controlled refrigerator error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | PF |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | GE Electronic-controlled refrigerator |
| System | Power supply |
| Meaning (service chart) | Power has been interrupted. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | GE Appliances support (products.geappliances.com) |
| Source document | GE electronic-controlled refrigerator error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code PF means on a GE Electronic-controlled refrigerator
Power has been interrupted. [1]
This is a power supply code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix GE Electronic-controlled refrigerator error code PF (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (PF) and copy the full model number from the rating label, so you can confirm this chart applies to your electronic-controlled refrigerator and order the right parts.
- Check the power supply. Make sure that the power cord is properly plugged into the electrical outlet.
- Check the condition of food. Check the condition of food in the refrigerator and freezer compartments.
- Clear the code at the controls. Press the System Check button to clear the error code and check for other failures.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If PF comes back after these checks, stop using the refrigerator for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the GE electronic-controlled refrigerator error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Power cord
When to call a technician
- Technician: replace the power cord if damaged.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact GE Appliances support (products.geappliances.com) first
Related error codes
Frequently asked questions
What does error code PF mean on a GE Electronic-controlled refrigerator?
The GE electronic-controlled refrigerator error-code chart lists PF as follows: Power has been interrupted.
Is it safe to keep using the Electronic-controlled refrigerator with PF?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix GE Electronic-controlled refrigerator error PF myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or GE Appliances support (products.geappliances.com).
Sources
- Sears PartsDirect: GE electronic-controlled refrigerator error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.