ErrorCodePro · Appliance Error CodesGE Range Error Codes: Full List & Meanings
Every GE range error code we have verified against GE's own support pages, with its official meaning. Codes vary by model, so confirm in your owner's manual. Support: GE Appliances support (products.geappliances.com).
Codes by system
All GE range error codes
Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.
| Code | Official meaning | System | Owner action |
|---|---|---|---|
| Bad Line | Power is applied but the unit isn't wired correctly. Contact an installer or electrician. | Power supply | Service |
| OFF | The oven is too hot to set self-clean, or just finished self-clean. Let it cool longer and retry. | Status / reminder | Service |
| ERR | There was an invalid entry when setting the controls. | Status / reminder | Service |
| LOC | Child Lockout is on (see your Owner's Manual). | Status / reminder | Service |
| ⊃ | Sabbath Mode is set. | Status / reminder | Service |
| F0 | GE says this usually means: keypanel problem. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. Also: F1, F6, F7 | Control / electronics | Service |
| F2 | GE says this usually means: oven temperature exceeded threshold. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. Also: F20 | Control / electronics | Service |
| F3 | GE says this usually means: oven sensor. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. Also: F4 | Control / electronics | Service |
| F5 | GE says this usually means: electronic control. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. Also: F8, FF | Control / electronics | Service |
| F9 | GE says this usually means: door lock circuit. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. Also: FC | Control / electronics | Service |
| FD | GE says this usually means: probe or receptacle. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. | Control / electronics | Service |
| F350 | GE says this usually means: upper cooling fan circuit or obstruction. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. | Control / electronics | Service |
| F96 | GE says this usually means: internal component. Turning off the breaker for 1–2 minutes may clear it. Otherwise a technician is needed. Also: F97, F7X | Control / electronics | Service |
Symptoms
Sources
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.