ErrorCodePro · Appliance Error Codes

Jenn-Air MicroClean HE dishwasher Error Code F6E2: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Jenn-Air MicroClean HE dishwasher error code F6E2 means: Water inlet valve failure. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Jenn-Air MicroClean HE dishwasher error-code chart, via Sears PartsDirect [1].

Quick facts

CodeF6E2
Also shown as6-2
Brand / applianceJenn-Air MicroClean HE dishwasher
SystemWater fill
Meaning (service chart)Water inlet valve failure. [1]
Keep using it?Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?Owner checks only (listed below)
SupportJenn-Air customer support (see your owner's manual)
Source documentJenn-Air MicroClean HE dishwasher error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F6E2 means on a Jenn-Air MicroClean HE dishwasher

Water inlet valve failure. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Jenn-Air MicroClean HE dishwasher error code F6E2 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Jenn-Air MicroClean HE dishwasher error-code chart (via Sears PartsDirect) [1], rewritten for clarity.
  1. Write down the code and model number. Note exactly what the display shows (F6E2) and copy the full model number from the rating label, so you can confirm this chart applies to your microClean HE dishwasher and order the right parts.
  2. Do a power reset. Unplug the dishwasher to disconnect electrical power.
  3. Remove the bottom front access. Remove the bottom front access panel and toe panel.
  4. Test and decide. Run a short cycle or restart and watch the display. If F6E2 comes back after these checks, stop using the dishwasher for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Jenn-Air MicroClean HE dishwasher error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

When to call a technician

Frequently asked questions

What does error code F6E2 mean on a Jenn-Air MicroClean HE dishwasher?

The Jenn-Air MicroClean HE dishwasher error-code chart lists F6E2 as follows: Water inlet valve failure.

Is it safe to keep using the MicroClean HE dishwasher with F6E2?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Jenn-Air MicroClean HE dishwasher error F6E2 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Jenn-Air customer support (see your owner's manual).

Is 6-2 the same as F6E2?

Yes. The source chart lists 6-2 with the same meaning as F6E2; the display format depends on the model.

Sources

  1. Sears PartsDirect: Jenn-Air MicroClean HE dishwasher error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Jenn-Air.