Jenn-Air MicroClean HE dishwasher Error Code F8E1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Jenn-Air MicroClean HE dishwasher error code F8E1 means: Slow drain. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Jenn-Air MicroClean HE dishwasher error-code chart, via Sears PartsDirect [1].

Quick facts

Code	F8E1
Also shown as	8-1
Brand / appliance	Jenn-Air MicroClean HE dishwasher
System	Drain
Meaning (service chart)	Slow drain. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	Jenn-Air customer support (see your owner's manual)
Source document	Jenn-Air MicroClean HE dishwasher error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F8E1 means on a Jenn-Air MicroClean HE dishwasher

Slow drain. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Jenn-Air MicroClean HE dishwasher error code F8E1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Jenn-Air MicroClean HE dishwasher error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (F8E1) and copy the full model number from the rating label, so you can confirm this chart applies to your microClean HE dishwasher and order the right parts.
Do a power reset. Unplug the dishwasher to disconnect electrical power.
Clear any clog or debris. Check the drain path and remove any obstruction you find.
Test and decide. Run a short cycle or restart and watch the display. If F8E1 comes back after these checks, stop using the dishwasher for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Jenn-Air MicroClean HE dishwasher error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Drain pump
Wiring harness

When to call a technician

If the drain path is clear, a technician should check the wiring between the drain pump and the electronic control board.
Reconnect any loose wires or replace the wire harness if damaged.
If the wiring is intact, a technician should replace the drain pump.
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Jenn-Air customer support (see your owner's manual) first

Frequently asked questions

What does error code F8E1 mean on a Jenn-Air MicroClean HE dishwasher?

The Jenn-Air MicroClean HE dishwasher error-code chart lists F8E1 as follows: Slow drain.

Is it safe to keep using the MicroClean HE dishwasher with F8E1?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Jenn-Air MicroClean HE dishwasher error F8E1 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Jenn-Air customer support (see your owner's manual).

Is 8-1 the same as F8E1?

Yes. The source chart lists 8-1 with the same meaning as F8E1; the display format depends on the model.

Sources

Sears PartsDirect: Jenn-Air MicroClean HE dishwasher error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Jenn-Air.