KitchenAid HE dishwasher Error Code F9E4: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

KitchenAid HE dishwasher error code F9E4 means: Lower spray arm error. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: KitchenAid HE dishwasher error-code chart, via Sears PartsDirect [1].

Quick facts

Code	F9E4
Also shown as	9-4
Brand / appliance	KitchenAid HE dishwasher
System	Motor / drive
Meaning (service chart)	Lower spray arm error. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	KitchenAid Product Help (producthelp.kitchenaid.com)
Source document	KitchenAid HE dishwasher error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F9E4 means on a KitchenAid HE dishwasher

Lower spray arm error. [1]

This is a motor / drive code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix KitchenAid HE dishwasher error code F9E4 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the KitchenAid HE dishwasher error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (F9E4) and copy the full model number from the rating label, so you can confirm this chart applies to your HE dishwasher and order the right parts.
Check the control lock. Check for obstructions blocking the lower spray arm from turning.
Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
Test and decide. Run a short cycle or restart and watch the display. If F9E4 comes back after these checks, stop using the dishwasher for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the KitchenAid HE dishwasher error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Lower spray arm motor

When to call a technician

Shut off power to the dishwasher and check the wiring connections on the lower spray arm motor.
If the wiring is intact, a technician should replace the lower spray arm motor.
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact KitchenAid Product Help (producthelp.kitchenaid.com) first

Frequently asked questions

What does error code F9E4 mean on a KitchenAid HE dishwasher?

The KitchenAid HE dishwasher error-code chart lists F9E4 as follows: Lower spray arm error.

Is it safe to keep using the HE dishwasher with F9E4?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix KitchenAid HE dishwasher error F9E4 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or KitchenAid Product Help (producthelp.kitchenaid.com).

Is 9-4 the same as F9E4?

Yes. The source chart lists 9-4 with the same meaning as F9E4; the display format depends on the model.

Sources

Sears PartsDirect: KitchenAid HE dishwasher error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with KitchenAid.