LG Top-load washer Error Code dL: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

LG top-load washer error code dL means: Lid lock failure. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: LG top-load washer error-code chart, via Sears PartsDirect [1].

Quick facts

Code	dL
Also shown as	None listed by the manufacturer
Brand / appliance	LG top-load washer
System	Door / lock
Meaning (service chart)	Lid lock failure. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	LG USA Support (lg.com/us/support)
Source document	LG top-load washer error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code dL means on an LG top-load washer

Lid lock failure. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix LG top-load washer error code dL (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the LG top-load washer error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (dL) and copy the full model number from the rating label, so you can confirm this chart applies to your top-load washer and order the right parts.
Close the door or lid fully. Check for debris in the lid lock assembly that could prevent the lock mechanism from engaging.
Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
Test and decide. Run a short cycle or restart and watch the display. If dL comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the LG top-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Lid lock/switch assembly

When to call a technician

Unplug the washer and check the wiring connections on the lid lock/switch assembly.
If you find no wiring problems, you usually need to replace the lid lock/switch assembly.
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact LG USA Support (lg.com/us/support) first

Frequently asked questions

What does error code dL mean on an LG top-load washer?

The LG top-load washer error-code chart lists dL as follows: Lid lock failure.

Is it safe to keep using the top-load washer with dL?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix LG top-load washer error dL myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or LG USA Support (lg.com/us/support).

Sources

Sears PartsDirect: LG top-load washer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with LG.