LG Wi-Fi front-load washer Error Code EE: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

LG Wi-Fi front-load washer error code EE means: Electronic control board failure. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: LG Wi-Fi front-load washer error-code chart, via Sears PartsDirect [1].

Quick facts

Code	EE
Also shown as	None listed by the manufacturer
Brand / appliance	LG Wi-Fi front-load washer
System	Control / electronics
Meaning (service chart)	Electronic control board failure. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	LG USA Support (lg.com/us/support)
Source document	LG Wi-Fi front-load washer error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code EE means on an LG Wi-Fi front-load washer

Electronic control board failure. [1]

This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix LG Wi-Fi front-load washer error code EE (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the LG Wi-Fi front-load washer error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (EE) and copy the full model number from the rating label, so you can confirm this chart applies to your wi-Fi front-load washer and order the right parts.
Do a power reset. Try to clear the code by unplugging the washer for 5 minutes.
Clear any clog or debris. Restore power and see if the code clears.
Test and decide. Run a short cycle or restart and watch the display. If EE comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the LG Wi-Fi front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Electronic control board

When to call a technician

If not, then replace the electronic control board.
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact LG USA Support (lg.com/us/support) first

Frequently asked questions

What does error code EE mean on an LG Wi-Fi front-load washer?

The LG Wi-Fi front-load washer error-code chart lists EE as follows: Electronic control board failure.

Is it safe to keep using the Wi-Fi front-load washer with EE?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix LG Wi-Fi front-load washer error EE myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or LG USA Support (lg.com/us/support).

Sources

Sears PartsDirect: LG Wi-Fi front-load washer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with LG.