ErrorCodePro · Appliance Error CodesMaytag MAH9700 model front-load washer Error Code nd: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Maytag MAH9700 model front-load washer error code nd means: Water isn't draining before the spin cycle begins. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Maytag MAH9700 model front-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | nd |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Maytag MAH9700 model front-load washer |
| System | Drain |
| Meaning (service chart) | Water isn't draining before the spin cycle begins. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 |
| Source document | Maytag MAH9700 model front-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code nd means on a Maytag MAH9700 model front-load washer
Water isn't draining before the spin cycle begins. [1]
This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Maytag MAH9700 model front-load washer error code nd (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (nd) and copy the full model number from the rating label, so you can confirm this chart applies to your MAH9700 model front-load washer and order the right parts.
- Check the house drain. Remove any clog from the house drain for the washer.
- Check the drain hose. Remove any clogs or kinks from the washer drain hose.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If nd comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Maytag MAH9700 model front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Drain pump
When to call a technician
- Unplug the washer and check the drain pump, and then replace the drain pump if damaged.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first
Related error codes
Frequently asked questions
What does error code nd mean on a Maytag MAH9700 model front-load washer?
The Maytag MAH9700 model front-load washer error-code chart lists nd as follows: Water isn't draining before the spin cycle begins.
Is it safe to keep using the MAH9700 model front-load washer with nd?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Maytag MAH9700 model front-load washer error nd myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.
Sources
- Sears PartsDirect: Maytag MAH9700 model front-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.