Maytag Front Load Washer Error Code F9E1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Maytag front load washer error code F9E1 means: Draining is taking longer than expected, usually over 8 minutes. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check the drain hose.

Quick facts

Code	F9E1
Also shown as	None listed by the manufacturer
Brand / appliance	Maytag front load washer
System	Drain
Official meaning	Draining is taking longer than expected, usually over 8 minutes. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Maytag Product Help (producthelp.maytag.com), 1-800-344-1274

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F9E1 means on a Maytag front load washer

Draining is taking longer than expected, usually over 8 minutes. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Maytag front load washer error code F9E1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Maytag's published guidance [1], rewritten for clarity.

Check the drain hose. Make sure it isn't kinked or clogged, and use the U-shaped hose form.
Standpipe height. The standpipe must be between 39 in (99 cm) and 96 in (244 cm) high.
Suds. Excess suds slow draining, so use HE detergent.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Drain hose

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first

Frequently asked questions

What does error code F9E1 mean on a Maytag front load washer?

Maytag lists F9E1 as follows: Draining is taking longer than expected, usually over 8 minutes.

Is it safe to keep using the front load washer with F9E1?

Not until the cause is fixed.

Can I fix Maytag front load washer error F9E1 myself?

Only with the owner checks on this page, starting with: check the drain hose. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.

Sources

https://producthelp.maytag.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Front_Load_Washers (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.