Miele Washer Error Code F11: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Miele washer error code F11 means: The drain is restricted. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: hose height.

Quick facts

Code	F11
Also shown as	None listed by the manufacturer
Brand / appliance	Miele washer
System	Drain
Official meaning	The drain is restricted. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Miele USA Service, 888-996-4353

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F11 means on a Miele washer

The drain is restricted. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Miele washer error code F11 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Miele's published guidance [1], rewritten for clarity.

Hose height. The drain hose end must be no higher than 3 ft 3 in (1 m).
Remove kinks. Straighten the drain hose.
Clean the drain filters. Turn the washer off, put a tray under the access panel, slowly loosen the filters to drain (hot water can scald), then remove and clean them.
Check the impellers. Remove buttons or coins, refit each filter on its correct side, and screw them tight.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Drain hose

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Miele USA Service, 888-996-4353 first

Frequently asked questions

What does error code F11 mean on a Miele washer?

Miele lists F11 as follows: The drain is restricted.

Is it safe to keep using the washer with F11?

Not until the cause is fixed.

Can I fix Miele washer error F11 myself?

Only with the owner checks on this page, starting with: hose height. If it persists, call a technician or Miele USA Service, 888-996-4353.

Sources

https://www.mieleusa.com/support/customer-assistance/washer-1323/all/fault_f11-93199759115 (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Miele.