ErrorCodePro · Appliance Error CodesWhirlpool Cabrio steam dryer Error Codes: Full List & Meanings
Every Whirlpool Cabrio steam dryer error code in the Whirlpool Cabrio steam dryer error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Whirlpool: 1-866-698-2538.
Codes by system
Control / electronics
All Whirlpool Cabrio steam dryer error codes
Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.
| Code | Meaning | System | Owner action |
|---|---|---|---|
| F1 E1 | Stuck motor relay. The electronic control board detects an internal motor relay failure. The motor relay is part of the electronic control board. | Motor / drive | Service |
| F1 E3 | Control console and electronic control board mismatch. | Control / electronics | Owner checks |
| F2 E1 | Stuck button. A stuck button on the user interface control causes this code. | Control / electronics | Service |
| F2 E4 | Control console failure. Also: F2 E5 | Control / electronics | Service |
| F3 E1 | Exhaust thermistor failure. The control detects a failed exhaust thermistor (temperature sensor). | Venting / airflow | Service |
| F3 E2 | Moisture sensor failure. | Sensors | Service |
| F3 E3 | Inlet thermistor failure. The control detects a failed inlet thermistor (temperature sensor). | Water fill | Service |
| F4 E1 | Heating element failure. Also: F4 E2 | Heating | Service |
| F4 E3 | Restricted air flow. | Venting / airflow | Reset only |
| F4 E4 | Low line 2 voltage. The L2 leg of 240-volt power is missing. | Power supply | Reset only |
| F6 E2 | No communication between the electronic control board and the control console. Also: F6 E3 | Control / electronics | Service |
Symptoms
Sources
- Sears PartsDirect: Whirlpool Cabrio steam dryer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.