Whirlpool Dryer Error Code L2: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool dryer error code L2 means: There may be a problem with the home power supply that stops the heater from turning on. The dryer still runs. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check both breakers.

Quick facts

Code	L2
Also shown as	F4E4
Brand / appliance	Whirlpool dryer
System	Power supply
Official meaning	There may be a problem with the home power supply that stops the heater from turning on. The dryer still runs. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code L2 means on a Whirlpool dryer

There may be a problem with the home power supply that stops the heater from turning on. The dryer still runs. [1]

This is a power supply code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool dryer error code L2 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Check both breakers. Electric dryers use a 30-amp circuit with two breakers, one for the motor and one for the heater. Make sure neither is tripped.
Clear the code. Touch any pad to clear the display.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Electric dryers need a 240-volt supply; any power cord, outlet or voltage check is for a qualified electrician
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code L2 mean on a Whirlpool dryer?

Whirlpool lists L2 as follows: There may be a problem with the home power supply that stops the heater from turning on. The dryer still runs.

Is it safe to keep using the dryer with L2?

Not until the cause is fixed.

Can I fix Whirlpool dryer error L2 myself?

Only with the owner checks on this page, starting with: check both breakers. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Is F4E4 the same as L2?

Yes. Whirlpool's documentation lists F4E4 with the same meaning as L2; the display format depends on the model.

Sources

Whirlpool Product Help: L2 - Error Code - Dryer (official)
Whirlpool Product Help: F4 E4 - Error Code - Dryer (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.