ErrorCodePro · Appliance Error CodesWhirlpool Duet HE front-load washer Error Code F29: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Whirlpool Duet HE front-load washer error code F29 means: Door unlock error. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Whirlpool Duet HE front-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | F29 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Whirlpool Duet HE front-load washer |
| System | Door / lock |
| Meaning (service chart) | Door unlock error. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Whirlpool: 1-866-698-2538 |
| Source document | Whirlpool Duet HE front-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code F29 means on a Whirlpool Duet HE front-load washer
Door unlock error. [1]
This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Whirlpool Duet HE front-load washer error code F29 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (F29) and copy the full model number from the rating label, so you can confirm this chart applies to your duet HE front-load washer and order the right parts.
- Do a power reset. Unplug the washer.
- Close the door or lid fully. Check for and clear any foreign objects or debris in the door lock receiver.
- Test and decide. Run a short cycle or restart and watch the display. If F29 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Whirlpool Duet HE front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Door lock/switch assembly
- Wire harness
When to call a technician
- To manually unlock and open the door, remove the bottom front service panel, reach up into the cabinet and pull down on the manual release tab on the bottom of the door lock/switch assembly.
- If the door lock receiver is clear, a technician should check the wire harness connections between the door lock/switch assembly and the main electronic control board.
- Reconnect any loose wires or replace the wire harness if damaged.
- If the wire connections are okay, a technician should replace the door lock/switch assembly.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first
Related error codes
Frequently asked questions
What does error code F29 mean on a Whirlpool Duet HE front-load washer?
The Whirlpool Duet HE front-load washer error-code chart lists F29 as follows: Door unlock error.
Is it safe to keep using the Duet HE front-load washer with F29?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Whirlpool Duet HE front-load washer error F29 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Whirlpool: 1-866-698-2538.
Sources
- Sears PartsDirect: Whirlpool Duet HE front-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.