Whirlpool Front Load Washer Error Code Err: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool front load washer error code Err means: The cycle was changed while running, or a start was attempted with the door open. [1] Keep using it? Yes. Start with the owner checks below, beginning with: close the door.

Quick facts

Code	Err
Also shown as	None listed by the manufacturer
Brand / appliance	Whirlpool front load washer (front load washers)
System	Status / reminder
Official meaning	The cycle was changed while running, or a start was attempted with the door open. [1]
Keep using it?	Yes
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code Err means on a Whirlpool front load washer

The cycle was changed while running, or a start was attempted with the door open. [1]

This is a status / reminder code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool front load washer error code Err (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Close the door. Close the door before pressing Start.
Reset the washer. Unplug the washer (or switch off its breaker) for 5 minutes, then restore power.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code Err mean on a Whirlpool front load washer?

Whirlpool lists Err as follows: The cycle was changed while running, or a start was attempted with the door open.

Is it safe to keep using the front load washer with Err?

Yes.

Can I fix Whirlpool front load washer error Err myself?

Only with the owner checks on this page, starting with: close the door. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Sources

Whirlpool Product Help: Err - Error Code - Front Load Washer (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.