ErrorCodePro · Appliance Error Codes

Bosch Freestanding range Error Code F170: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Bosch freestanding range error code F170 means: Power failure. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Bosch freestanding range error-code chart, via Sears PartsDirect [1].

Quick facts

CodeF170
Also shown asNone listed by the manufacturer
Brand / applianceBosch freestanding range
SystemPower supply
Meaning (service chart)Power failure. [1]
Keep using it?Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?Owner checks only (listed below)
SupportBosch Customer Support: 1-800-944-2904
Source documentBosch freestanding range error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F170 means on a Bosch freestanding range

Power failure. [1]

This is a power supply code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Bosch freestanding range error code F170 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Bosch freestanding range error-code chart (via Sears PartsDirect) [1], rewritten for clarity.
  1. Write down the code and model number. Note exactly what the display shows (F170) and copy the full model number from the rating label, so you can confirm this chart applies to your freestanding range and order the right parts.
  2. Clear the code at the controls. Press the Cancel button to clear the code.
  3. Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
  4. Test and decide. Run a short cycle or restart and watch the display. If F170 comes back after these checks, stop using the range for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Bosch freestanding range error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

When to call a technician

Frequently asked questions

What does error code F170 mean on a Bosch freestanding range?

The Bosch freestanding range error-code chart lists F170 as follows: Power failure.

Is it safe to keep using the freestanding range with F170?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Bosch freestanding range error F170 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Bosch Customer Support: 1-800-944-2904.

Sources

  1. Sears PartsDirect: Bosch freestanding range error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Bosch.