ErrorCodePro · Appliance Error CodesEdgeStar Laundry center Error Code E11: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
EdgeStar laundry center error code E11 means: Water left in tub. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: EdgeStar laundry center error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | E11 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | EdgeStar laundry center |
| System | Drain |
| Meaning (service chart) | Water left in tub. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | EdgeStar customer support (see your owner's manual) |
| Source document | EdgeStar laundry center error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code E11 means on an EdgeStar laundry center
Water left in tub. [1]
This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix EdgeStar laundry center error code E11 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (E11) and copy the full model number from the rating label, so you can confirm this chart applies to your laundry center and order the right parts.
- Check the drain hose. Check the drain hose for kinks and clogs.
- Clean the drain filter. Clean debris from the coin trap.
- Do a power reset. Unplug the washer to clear the error code.
- Test and decide. Run a short cycle or restart and watch the display. If E11 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the EdgeStar laundry center error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Drain pump
When to call a technician
- Technician: replace the drain pump if it doesn't run when activated.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact EdgeStar customer support (see your owner's manual) first
Related error codes
Frequently asked questions
What does error code E11 mean on an EdgeStar laundry center?
The EdgeStar laundry center error-code chart lists E11 as follows: Water left in tub.
Is it safe to keep using the laundry center with E11?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix EdgeStar laundry center error E11 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or EdgeStar customer support (see your owner's manual).
Sources
- Sears PartsDirect: EdgeStar laundry center error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with EdgeStar.