ErrorCodePro · Appliance Error CodesElectrolux Compact condensing dryer Error Code E5A: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Electrolux compact condensing dryer error code E5A means: Overheated inverter board. This error can be caused by continuous dryer operation in hot ambient conditions. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Electrolux compact condensing dryer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | E5A |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Electrolux compact condensing dryer |
| System | Control / electronics |
| Meaning (service chart) | Overheated inverter board. This error can be caused by continuous dryer operation in hot ambient conditions. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Electrolux support (owner.electrolux.com) |
| Source document | Electrolux compact condensing dryer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code E5A means on an Electrolux compact condensing dryer
Overheated inverter board. This error can be caused by continuous dryer operation in hot ambient conditions. [1]
This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Electrolux compact condensing dryer error code E5A (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (E5A) and copy the full model number from the rating label, so you can confirm this chart applies to your compact condensing dryer and order the right parts.
- Clear the code at the controls. Allow the dryer to cool and then try to restart the dryer.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If E5A comes back after these checks, stop using the dryer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Electrolux compact condensing dryer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Inverter board
When to call a technician
- If the code appears under normal operation and conditions, unplug the dryer and replace the inverter board.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Electrolux support (owner.electrolux.com) first
Related error codes
Frequently asked questions
What does error code E5A mean on an Electrolux compact condensing dryer?
The Electrolux compact condensing dryer error-code chart lists E5A as follows: Overheated inverter board. This error can be caused by continuous dryer operation in hot ambient conditions.
Is it safe to keep using the compact condensing dryer with E5A?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Electrolux compact condensing dryer error E5A myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Electrolux support (owner.electrolux.com).
Sources
- Sears PartsDirect: Electrolux compact condensing dryer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Electrolux.