ErrorCodePro · Appliance Error Codes

Electrolux Dryer Error Code E42: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Electrolux dryer error code E42 means: The door isn't fully closed. [1] Keep using it? Yes. Start with the owner checks below, beginning with: close the door.

Quick facts

CodeE42
Also shown asNone listed by the manufacturer
Brand / applianceElectrolux dryer
SystemDoor / lock
Official meaningThe door isn't fully closed. [1]
Keep using it?Yes
DIY-safe?Owner checks only (listed below)
SupportElectrolux support (owner.electrolux.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code E42 means on an Electrolux dryer

The door isn't fully closed. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Electrolux dryer error code E42 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Electrolux's published guidance [1], rewritten for clarity.
  1. Close the door. Make sure the door isn't blocked and is fully closed.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Frequently asked questions

What does error code E42 mean on an Electrolux dryer?

Electrolux lists E42 as follows: The door isn't fully closed.

Is it safe to keep using the dryer with E42?

Yes.

Can I fix Electrolux dryer error E42 myself?

Only with the owner checks on this page, starting with: close the door. If it persists, call a technician or Electrolux support (owner.electrolux.com).

Sources

  1. https://owner.electrolux.com/support-articles/article/1820071-laundry-dryer-error-code-guide (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Electrolux.