Whirlpool Dryer Error Code ERR: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool dryer error code ERR means: The door isn't fully closed and latched, so the dryer won't run. [1] Keep using it? Yes, once latched. Start with the owner checks below, beginning with: latch the door.

Quick facts

Code	ERR
Also shown as	None listed by the manufacturer
Brand / appliance	Whirlpool dryer
System	Door / lock
Official meaning	The door isn't fully closed and latched, so the dryer won't run. [1]
Keep using it?	Yes, once latched
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code ERR means on a Whirlpool dryer

The door isn't fully closed and latched, so the dryer won't run. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool dryer error code ERR (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Latch the door. Push the door firmly to engage the latch. Some models have an upper and a lower latch, and both must catch.
Reset the dryer. Turn off the dryer's breaker(s) for one minute, turn them back on, start a timed dry cycle and watch for a minute to see if the code returns.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code ERR mean on a Whirlpool dryer?

Whirlpool lists ERR as follows: The door isn't fully closed and latched, so the dryer won't run.

Is it safe to keep using the dryer with ERR?

Yes, once latched.

Can I fix Whirlpool dryer error ERR myself?

Only with the owner checks on this page, starting with: latch the door. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Sources

Whirlpool Product Help: ERR - Error Code - Dryer (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.