ErrorCodePro · Appliance Error Codes

Frigidaire Front-load washer Error Code EF1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Frigidaire front-load washer error code EF1 means: Clogged drain pump. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Frigidaire front-load washer error-code chart, via Sears PartsDirect [1].

Quick facts

CodeEF1
Also shown asNone listed by the manufacturer
Brand / applianceFrigidaire front-load washer
SystemDrain
Meaning (service chart)Clogged drain pump. [1]
Keep using it?Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?Owner checks only (listed below)
SupportFrigidaire support (owner.frigidaire.com)
Source documentFrigidaire front-load washer error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code EF1 means on a Frigidaire front-load washer

Clogged drain pump. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Frigidaire front-load washer error code EF1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Frigidaire front-load washer error-code chart (via Sears PartsDirect) [1], rewritten for clarity.
  1. Write down the code and model number. Note exactly what the display shows (EF1) and copy the full model number from the rating label, so you can confirm this chart applies to your front-load washer and order the right parts.
  2. Do a power reset. Unplug the washer.
  3. Clear any clog or debris. Clear the clog from the drain pump.
  4. Test and decide. Run a short cycle or restart and watch the display. If EF1 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Frigidaire front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

When to call a technician

Frequently asked questions

What does error code EF1 mean on a Frigidaire front-load washer?

The Frigidaire front-load washer error-code chart lists EF1 as follows: Clogged drain pump.

Is it safe to keep using the front-load washer with EF1?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Frigidaire front-load washer error EF1 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).

Sources

  1. Sears PartsDirect: Frigidaire front-load washer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.