ErrorCodePro · Appliance Error CodesFrigidaire Front-load washer Error Code EF2: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Frigidaire front-load washer error code EF2 means: Too much suds. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Frigidaire front-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | EF2 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Frigidaire front-load washer |
| System | Suds / detergent |
| Meaning (service chart) | Too much suds. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Frigidaire support (owner.frigidaire.com) |
| Source document | Frigidaire front-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code EF2 means on a Frigidaire front-load washer
Too much suds. [1]
This is a suds / detergent code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Frigidaire front-load washer error code EF2 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (EF2) and copy the full model number from the rating label, so you can confirm this chart applies to your front-load washer and order the right parts.
- Fix the detergent dose. Reduce the amount of high-efficiency (HE) high-efficiency detergent being used in the washer.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If EF2 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Frigidaire front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- HE detergent Water filters Find the perfect fit for your refrigerator. Try our water filter finder Most common symptoms to help you fix your washers Choose a symptom to see related washer repairs. View all Why won't my washing machine drain? Main causes: clogged drain hose
- House drain clogged
- Bad drain pump
- Water-level pressure switch failure
- Bad control b... Read more Why your washing machine won't finish its cycle Main causes: broken lid switch
- Lid lock
- Bad pressure switch
- Broken shifter assembly
When to call a technician
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Frigidaire support (owner.frigidaire.com) first
Related error codes
Frequently asked questions
What does error code EF2 mean on a Frigidaire front-load washer?
The Frigidaire front-load washer error-code chart lists EF2 as follows: Too much suds.
Is it safe to keep using the front-load washer with EF2?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Frigidaire front-load washer error EF2 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Frigidaire support (owner.frigidaire.com).
Sources
- Sears PartsDirect: Frigidaire front-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Frigidaire.