GE GFD model dryer Error Codes: Full List & Meanings

Every GE GFD model dryer error code in the GE GFD model dryer error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: GE Appliances support (products.geappliances.com).

Codes by system

Control / electronics

All GE GFD model dryer error codes

Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.

Code	Meaning	System	Owner action
000	No errors.	Control / electronics	Service
001	The inlet thermistor (temperature sensor) is defective. The inlet thermistor on the side of the inlet air duct inside the dryer measures the temperature of heated air entering the dryer drum. Also: 003	Water fill	Service
002	The outlet thermistor (temperature sensor) is defective. The outlet thermistor on the blower housing behind the fan measures the temperature of heated air leaving the dryer drum. Also: 004	Heating	Service
005	The main control board is defective.	Control / electronics	Reset only
006	Stuck button on the control panel.	Control / electronics	Owner checks
007	Power supply is mis-wired. The Line 2 (L2) and Neutral (N) are reversed.	Power supply	Service
008	Door switch not opening; 5 cycles ran without the door switch opening. Also: 00d	Door / lock	Service
009	Drive motor problem.	Motor / drive	Service

Symptoms

Sources

Sears PartsDirect: GE GFD model dryer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.