ErrorCodePro · Appliance Error CodesGE GFD model dryer Error Code 006: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
GE GFD model dryer error code 006 means: Stuck button on the control panel. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: GE GFD model dryer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | 006 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | GE GFD model dryer |
| System | Control / electronics |
| Meaning (service chart) | Stuck button on the control panel. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | GE Appliances support (products.geappliances.com) |
| Source document | GE GFD model dryer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code 006 means on a GE GFD model dryer
Stuck button on the control panel. [1]
This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix GE GFD model dryer error code 006 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (006) and copy the full model number from the rating label, so you can confirm this chart applies to your GFD model dryer and order the right parts.
- Push each button on the. Push each button on the control panel to free the stuck button.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If 006 comes back after these checks, stop using the dryer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the GE GFD model dryer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Control panel components
- Main control board
When to call a technician
- If the code doesn't clear, unplug the dryer and replace any damaged control panel components.
- If the control panel components are okay, a technician should replace the main control board.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact GE Appliances support (products.geappliances.com) first
Related error codes
Frequently asked questions
What does error code 006 mean on a GE GFD model dryer?
The GE GFD model dryer error-code chart lists 006 as follows: Stuck button on the control panel.
Is it safe to keep using the GFD model dryer with 006?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix GE GFD model dryer error 006 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or GE Appliances support (products.geappliances.com).
Sources
- Sears PartsDirect: GE GFD model dryer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.