GE GFW front-load washer Error Code 8: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

GE GFW front-load washer error code 8 means: Water level pressure sensor failure. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: GE GFW front-load washer error-code chart, via Sears PartsDirect [1].

Quick facts

Code	8
Also shown as	None listed by the manufacturer
Brand / appliance	GE GFW front-load washer
System	Water fill
Meaning (service chart)	Water level pressure sensor failure. [1]
Keep using it?	Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?	Owner checks only (listed below)
Support	GE Appliances support (products.geappliances.com)
Source document	GE GFW front-load washer error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code 8 means on a GE GFW front-load washer

Water level pressure sensor failure. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix GE GFW front-load washer error code 8 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the GE GFW front-load washer error-code chart (via Sears PartsDirect) [1], rewritten for clarity.

Write down the code and model number. Note exactly what the display shows (8) and copy the full model number from the rating label, so you can confirm this chart applies to your GFW front-load washer and order the right parts.
Open the water supply. Shut off the water supply faucets and disconnect the water supply hoses from the back of the washer.
Check the inlet water valve. Check the inlet water valve screens for deposits.
Clear any clog or debris. Check the hoses for clogs if water doesn’t flow through the supply hoses.
Reconnect the air hose. Reconnect the air hose if it’s loose.
Test and decide. Run a short cycle or restart and watch the display. If 8 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the GE GFW front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Inlet water valve assembly
Pressure switch air hose
Electronic control board

When to call a technician

Technician: replace the inlet water valves if their inlet water screens are clogged with deposits.
If water flows through the supply hoses, remove the top cover and check the wire harness connections between the control board and the inlet water valves.
Reconnect any loose wires.
If the wiring connections are okay, then you’ll likely need to replace the inlet water valves.
If the washer fills when this code appears, unplug the washer and then check the air hose between the bottom of the tub and the connection on the electronic control board.
Technician: replace the air hose if it’s pinched, punctured or otherwise damaged.
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact GE Appliances support (products.geappliances.com) first

Frequently asked questions

What does error code 8 mean on a GE GFW front-load washer?

The GE GFW front-load washer error-code chart lists 8 as follows: Water level pressure sensor failure.

Is it safe to keep using the GFW front-load washer with 8?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix GE GFW front-load washer error 8 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or GE Appliances support (products.geappliances.com).

Sources

Sears PartsDirect: GE GFW front-load washer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.