Whirlpool Front Load Washer Error Code F20: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Whirlpool front load washer error code F20 means: There is a water inlet problem: no water, or not enough water, is reaching the washer. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: open both faucets.

Quick facts

Code	F20
Also shown as	None listed by the manufacturer
Brand / appliance	Whirlpool front load washer (front load washers)
System	Water fill
Official meaning	There is a water inlet problem: no water, or not enough water, is reaching the washer. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Whirlpool: 1-866-698-2538

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F20 means on a Whirlpool front load washer

There is a water inlet problem: no water, or not enough water, is reaching the washer. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Whirlpool front load washer error code F20 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Whirlpool's published guidance [1], rewritten for clarity.

Open both faucets. Make sure the hot and cold faucets are fully on.
Check the screens. Check that the inlet screens are not clogged.
Check the hoses. Make sure the inlet hoses are not kinked.
Reset the washer. Unplug the washer (or switch off its breaker) for 5 minutes, then restore power.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first

Frequently asked questions

What does error code F20 mean on a Whirlpool front load washer?

Whirlpool lists F20 as follows: There is a water inlet problem: no water, or not enough water, is reaching the washer.

Is it safe to keep using the front load washer with F20?

Not until the cause is fixed.

Can I fix Whirlpool front load washer error F20 myself?

Only with the owner checks on this page, starting with: open both faucets. If it persists, call a technician or Whirlpool: 1-866-698-2538.

Sources

Whirlpool Product Help: F20 - Front Load Washer (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.