GE UltraFast Combo Washer/Dryer Error Codes: Full List & Meanings

Every GE ultrafast combo washer/dryer error code we have verified against GE's own support pages, with its official meaning. Codes vary by model, so confirm in your owner's manual. Support: GE Appliances support (products.geappliances.com).

Codes by system

Venting / airflow

Drain

All GE ultrafast combo washer/dryer error codes

Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.

Code	Official meaning	System	Owner action
353	Usually the lint filter is clogged with fabric softener residue.	Venting / airflow	Owner checks
18	The pump filter needs cleaning. You may also see very wet loads or longer dry times.	Drain	Owner checks
Confirm H2O Supply is ON	No water is entering. There's a 4-minute lockout. Turn on a supply valve, or the sink faucet if you use the unicouple hookup.	Water fill	Service
DOOR OPEN	Close the door fully to start.	Door / lock	Service

Symptoms

Sources

https://products.geappliances.com/appliance/gea-support-search-content?contentId=000063878 (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.