GE UltraFast Combo Washer/Dryer Error Code 353: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

GE ultrafast combo washer/dryer error code 353 means: Usually the lint filter is clogged with fabric softener residue. [1] Keep using it? After cleaning. Start with the owner checks below, beginning with: separate the filter.

Quick facts

Code	353
Also shown as	None listed by the manufacturer
Brand / appliance	GE ultrafast combo washer/dryer
System	Venting / airflow
Official meaning	Usually the lint filter is clogged with fabric softener residue. [1]
Keep using it?	After cleaning
DIY-safe?	Owner checks only (listed below)
Support	GE Appliances support (products.geappliances.com)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code 353 means on a GE ultrafast combo washer/dryer

Usually the lint filter is clogged with fabric softener residue. [1]

This is a venting / airflow code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix GE ultrafast combo washer/dryer error code 353 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on GE's published guidance [1], rewritten for clarity.

Separate the filter. Separate the foam filter from the plastic mesh screen.
Wash. Rinse the foam in warm water and scrub the screen with a soft brush and water.
Retest. Refit the filter and run a wash & dry cycle.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Lint filter

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact GE Appliances support (products.geappliances.com) first

Frequently asked questions

What does error code 353 mean on a GE ultrafast combo washer/dryer?

GE lists 353 as follows: Usually the lint filter is clogged with fabric softener residue.

Is it safe to keep using the ultrafast combo washer/dryer with 353?

After cleaning.

Can I fix GE ultrafast combo washer/dryer error 353 myself?

Only with the owner checks on this page, starting with: separate the filter. If it persists, call a technician or GE Appliances support (products.geappliances.com).

Sources

https://products.geappliances.com/appliance/gea-support-search-content?contentId=000063878 (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with GE.