ErrorCodePro · Appliance Error CodesHaier Front-load washer Error Code bLoC PunP: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Haier front-load washer error code bLoC PunP means: Water not draining. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Haier front-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | bLoC PunP |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Haier front-load washer |
| System | Drain |
| Meaning (service chart) | Water not draining. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Haier customer support (see your owner's manual) |
| Source document | Haier front-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code bLoC PunP means on a Haier front-load washer
Water not draining. [1]
This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Haier front-load washer error code bLoC PunP (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (bLoC PunP) and copy the full model number from the rating label, so you can confirm this chart applies to your front-load washer and order the right parts.
- Check the house drain. Remove any clogs from the house drain for the washer.
- Check the drain hose. Remove any clogs or kinks from the washer drain hose.
- Clean the filter. Unplug the washer and check the large-item filter in the drain pump for a clog.
- Test and decide. Run a short cycle or restart and watch the display. If bLoC PunP comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Haier front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Drain pump
When to call a technician
- If the drain pump is defective, a technician should replace it.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Haier customer support (see your owner's manual) first
Related error codes
Frequently asked questions
What does error code bLoC PunP mean on a Haier front-load washer?
The Haier front-load washer error-code chart lists bLoC PunP as follows: Water not draining.
Is it safe to keep using the front-load washer with bLoC PunP?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Haier front-load washer error bLoC PunP myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Haier customer support (see your owner's manual).
Sources
- Sears PartsDirect: Haier front-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Haier.