ErrorCodePro · Appliance Error Codes

Kenmore 110 model Oasis top-load washer Error Code F50: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Kenmore 110 model Oasis top-load washer error code F50 means: Motor stalled. The motor RPS (Rotor Position Sensor) detects no rotation of the drive motor. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Kenmore 110 model Oasis top-load washer error-code chart, via Sears PartsDirect [1].

Quick facts

CodeF50
Also shown asNone listed by the manufacturer
Brand / applianceKenmore 110 model Oasis top-load washer
SystemMotor / drive
Meaning (service chart)Motor stalled. The motor RPS (Rotor Position Sensor) detects no rotation of the drive motor. [1]
Keep using it?Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?Owner checks only (listed below)
SupportKenmore customer support (kenmore.com) or a Sears-authorized technician
Source documentKenmore 110 model Oasis top-load washer error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F50 means on a Kenmore 110 model Oasis top-load washer

Motor stalled. The motor RPS (Rotor Position Sensor) detects no rotation of the drive motor. [1]

This is a motor / drive code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Kenmore 110 model Oasis top-load washer error code F50 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Kenmore 110 model Oasis top-load washer error-code chart (via Sears PartsDirect) [1], rewritten for clarity.
  1. Write down the code and model number. Note exactly what the display shows (F50) and copy the full model number from the rating label, so you can confirm this chart applies to your 110 model Oasis top-load washer and order the right parts.
  2. Do a power reset. Unplug the washer.
  3. Check. Check to see if the basket spins freely.
  4. Test and decide. Run a short cycle or restart and watch the display. If F50 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Kenmore 110 model Oasis top-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

When to call a technician

Frequently asked questions

What does error code F50 mean on a Kenmore 110 model Oasis top-load washer?

The Kenmore 110 model Oasis top-load washer error-code chart lists F50 as follows: Motor stalled. The motor RPS (Rotor Position Sensor) detects no rotation of the drive motor.

Is it safe to keep using the 110 model Oasis top-load washer with F50?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Kenmore 110 model Oasis top-load washer error F50 myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Kenmore customer support (kenmore.com) or a Sears-authorized technician.

Sources

  1. Sears PartsDirect: Kenmore 110 model Oasis top-load washer error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.