Kenmore 110 model Oasis top-load washer Error Code oL: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Kenmore 110 model Oasis top-load washer error code oL means: Overloaded. The size of the load exceeds the washers capacity. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Kenmore 110 model Oasis top-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | oL |
|---|---|
| Also shown as | F70 |
| Brand / appliance | Kenmore 110 model Oasis top-load washer |
| System | Control / electronics |
| Meaning (service chart) | Overloaded. The size of the load exceeds the washers capacity. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Kenmore customer support (kenmore.com) or a Sears-authorized technician |
| Source document | Kenmore 110 model Oasis top-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code oL means on a Kenmore 110 model Oasis top-load washer
Overloaded. The size of the load exceeds the washers capacity. [1]
This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Kenmore 110 model Oasis top-load washer error code oL (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (oL) and copy the full model number from the rating label, so you can confirm this chart applies to your 110 model Oasis top-load washer and order the right parts.
- Rebalance the load. Open the lid and remove some garments.
- Clear the code at the controls. Restart the cycle.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If oL comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Kenmore 110 model Oasis top-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
No specific part is implied by the manufacturer's guidance for this code.
When to call a technician
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Kenmore customer support (kenmore.com) or a Sears-authorized technician first
Related error codes
Frequently asked questions
What does error code oL mean on a Kenmore 110 model Oasis top-load washer?
The Kenmore 110 model Oasis top-load washer error-code chart lists oL as follows: Overloaded. The size of the load exceeds the washers capacity.
Is it safe to keep using the 110 model Oasis top-load washer with oL?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Kenmore 110 model Oasis top-load washer error oL myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Kenmore customer support (kenmore.com) or a Sears-authorized technician.
Is F70 the same as oL?
Yes. The source chart lists F70 with the same meaning as oL; the display format depends on the model.
Sources
- Sears PartsDirect: Kenmore 110 model Oasis top-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.