Kenmore Oasis dryer Error Codes: Full List & Meanings
Every Kenmore Oasis dryer error code in the Kenmore Oasis dryer error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Kenmore customer support (kenmore.com) or a Sears-authorized technician.
Codes by system
Motor / drive
Heating
All Kenmore Oasis dryer error codes
Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.
| Code | Meaning | System | Owner action |
|---|---|---|---|
| AF | Exhaust air flow restriction. The exhaust air flow to the outside of your home is restricted. Also: F-30 | Venting / airflow | Reset only |
| PF | Power failure. A power failure occurred while the dryer was running. | Power supply | See page |
| F-01 | Main electronic control board failure. | Control / electronics | Reset only |
| F-02 | User interface keypad failure. A stuck button on the user interface control board causes this code. | Control / electronics | Service |
| F-20 | Heater relay failure. The heater relay on the main electronic control board failed. Also: F-21 | Heating | Service |
| F-22 | Exhaust thermistor failure. | Venting / airflow | Reset only |
| F-23 | Exhaust thermistor failure. | Venting / airflow | Reset only |
| F-24 | Inlet thermistor failure. Also: F-25 | Water fill | Service |
| F-26 | Drive motor failure. | Motor / drive | Reset only |
| F-28 | Moisture sensor failure. | Sensors | Service |
| F29 | Moisture sensor failure. | Sensors | Service |
| F-31 | Low L2 voltage. The L2 leg of 240 volt power is below 30 volts. | Power supply | See page |
| F-40 | Communication error between the main electronic control board and the blower motor control board. A blown thermal fuse will prevent the blower motor control board from getting power, triggering the F-40 code. | Motor / drive | Service |
| F-41 | Blower motor failure. | Motor / drive | Service |
| F-42 | Undervoltage failure. Also: F-43 | Control / electronics | Service |
| F-44 | Blower motor control board failure. A blown thermal fuse will prevent the blower motor control board from getting power, triggering the F-44 code. | Motor / drive | Service |
| F-45 | Blower motor speed sensor failure. | Motor / drive | Owner checks |
| F-46 | Blower motor failure. | Motor / drive | Service |
| F-47 | Not used. This error code may appear when entering diagnostics but you should ignore it because it isn't used. The error code explanations shown below can help you diagnose a problem with your Kenmore Elite Oasis dryer. ","nodeType":"text"}],"nodeType":"paragraph"},{"data":{},"content":[{"data":{},"marks":[],"value":"After diagnosing the cause of the failure, order the repair part you need to fix the dryer problem. | Heating | Owner checks |
Symptoms
Sources
- Sears PartsDirect: Kenmore Oasis dryer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.