ErrorCodePro · Appliance Error CodesKenmore Oasis dryer Error Code F-45: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Kenmore Oasis dryer error code F-45 means: Blower motor speed sensor failure. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Kenmore Oasis dryer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | F-45 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Kenmore Oasis dryer |
| System | Motor / drive |
| Meaning (service chart) | Blower motor speed sensor failure. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Kenmore customer support (kenmore.com) or a Sears-authorized technician |
| Source document | Kenmore Oasis dryer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code F-45 means on a Kenmore Oasis dryer
Blower motor speed sensor failure. [1]
This is a motor / drive code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Kenmore Oasis dryer error code F-45 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (F-45) and copy the full model number from the rating label, so you can confirm this chart applies to your oasis dryer and order the right parts.
- Check the vent. Check for a clogged exhaust vent because a clogged vent can restrict fan speed and trigger the F-45 code.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If F-45 comes back after these checks, stop using the dryer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Kenmore Oasis dryer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Blower fan
- Wire harness
When to call a technician
- Technician: check the wire harness connections between the blower motor and the blower motor control board.
- Reconnect any loose wires or replace the wire harness if damaged.
- Technician: check to see if the blower fan spins freely.
- Technician: replace the blower fan if the fan spins freely and the exhaust vent is clear.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Kenmore customer support (kenmore.com) or a Sears-authorized technician first
Related error codes
Frequently asked questions
What does error code F-45 mean on a Kenmore Oasis dryer?
The Kenmore Oasis dryer error-code chart lists F-45 as follows: Blower motor speed sensor failure.
Is it safe to keep using the Oasis dryer with F-45?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Kenmore Oasis dryer error F-45 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Kenmore customer support (kenmore.com) or a Sears-authorized technician.
Sources
- Sears PartsDirect: Kenmore Oasis dryer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Kenmore.