ErrorCodePro · Appliance Error CodesMaytag Compact front-load washer Error Code F30: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Maytag compact front-load washer error code F30 means: Door lock or door switch failure. The control detects that the door switch is open with the door locked. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Maytag compact front-load washer error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | F30 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Maytag compact front-load washer |
| System | Door / lock |
| Meaning (service chart) | Door lock or door switch failure. The control detects that the door switch is open with the door locked. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 |
| Source document | Maytag compact front-load washer error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code F30 means on a Maytag compact front-load washer
Door lock or door switch failure. The control detects that the door switch is open with the door locked. [1]
This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Maytag compact front-load washer error code F30 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (F30) and copy the full model number from the rating label, so you can confirm this chart applies to your compact front-load washer and order the right parts.
- Close the door or lid fully. Push the door in and check to make sure it's completely closed.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If F30 comes back after these checks, stop using the washer for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Maytag compact front-load washer error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Door switch
- Door lock assembly
When to call a technician
- If the door is closing completely and the error occurs, a technician should replace the door switch.
- If the problem continues, a technician should replace the door lock assembly.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first
Related error codes
Frequently asked questions
What does error code F30 mean on a Maytag compact front-load washer?
The Maytag compact front-load washer error-code chart lists F30 as follows: Door lock or door switch failure. The control detects that the door switch is open with the door locked.
Is it safe to keep using the compact front-load washer with F30?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Maytag compact front-load washer error F30 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.
Sources
- Sears PartsDirect: Maytag compact front-load washer error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.