Maytag Dishwasher Error Code F8E4: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Maytag dishwasher error code F8E4 means: Water was detected in the drip tray (float switch). [1] Keep using it? No: turn off the water supply first. Start with the owner checks below, beginning with: check the connections.

Quick facts

Code	F8E4
Also shown as	None listed by the manufacturer
Brand / appliance	Maytag dishwasher
System	Leak protection
Official meaning	Water was detected in the drip tray (float switch). [1]
Keep using it?	No: turn off the water supply first
DIY-safe?	Owner checks only (listed below)
Support	Maytag Product Help (producthelp.maytag.com), 1-800-344-1274

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F8E4 means on a Maytag dishwasher

Water was detected in the drip tray (float switch). [1]

This is a leak protection code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Maytag dishwasher error code F8E4 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Maytag's published guidance [1], rewritten for clarity.

Check the connections. On new installs, check the rubber washers are seated and hand-tighten the 3/4 in elbow fitting.
Empty the drip tray. Empty any water from the drip tray.
Check for suds. Hand dish soap causes suds, so use only dishwasher detergent.
Clear the code. Press Cancel once to silence the alarm and again to clear the code.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Professionally installed units: turn off the water, press Cancel once, keep the door closed and the power on, then call for service
Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first

Frequently asked questions

What does error code F8E4 mean on a Maytag dishwasher?

Maytag lists F8E4 as follows: Water was detected in the drip tray (float switch).

Is it safe to keep using the dishwasher with F8E4?

No: turn off the water supply first.

Can I fix Maytag dishwasher error F8E4 myself?

Only with the owner checks on this page, starting with: check the connections. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.

Sources

https://producthelp.maytag.com/Dishwashers/Dishwasher/Error_Code_or_Flashing_Lights/Error_Codes/F8E4_-_Dishwasher (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.