Maytag Dishwasher Error Code F9E1: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Maytag dishwasher error code F9E1 means: Draining is taking too long. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: clean the filter.

Quick facts

Code	F9E1
Also shown as	None listed by the manufacturer
Brand / appliance	Maytag dishwasher
System	Drain
Official meaning	Draining is taking too long. [1]
Keep using it?	Not until the cause is fixed
DIY-safe?	Owner checks only (listed below)
Support	Maytag Product Help (producthelp.maytag.com), 1-800-344-1274

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code F9E1 means on a Maytag dishwasher

Draining is taking too long. [1]

This is a drain code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Maytag dishwasher error code F9E1 (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Maytag's published guidance [1], rewritten for clarity.

Clean the filter. Remove the filter and rinse it under running water.
Check the drain hose. Look for kinks, pinches or clogs between the dishwasher and the sink.
Disposer. Make sure the disposer is clear and its knockout plug was removed.
Air gap. If you have one, clear it per its maker's instructions.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

Filter
Drain hose

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first

Frequently asked questions

What does error code F9E1 mean on a Maytag dishwasher?

Maytag lists F9E1 as follows: Draining is taking too long.

Is it safe to keep using the dishwasher with F9E1?

Not until the cause is fixed.

Can I fix Maytag dishwasher error F9E1 myself?

Only with the owner checks on this page, starting with: clean the filter. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.

Sources

https://producthelp.maytag.com/Dishwashers/Dishwasher/Error_Code_or_Flashing_Lights/Error_Codes/F9E1_-_Dishwasher (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.