Maytag Top Load Washer Error Code HC: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Maytag top load washer error code HC means: The hot and cold inlet hoses are reversed. The code shows at the end of the wash cycle. [1] Keep using it? Yes. Start with the owner checks below, beginning with: swap the hoses.

Quick facts

Code	HC
Also shown as	None listed by the manufacturer
Brand / appliance	Maytag top load washer
System	Water fill
Official meaning	The hot and cold inlet hoses are reversed. The code shows at the end of the wash cycle. [1]
Keep using it?	Yes
DIY-safe?	Owner checks only (listed below)
Support	Maytag Product Help (producthelp.maytag.com), 1-800-344-1274

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code HC means on a Maytag top load washer

The hot and cold inlet hoses are reversed. The code shows at the end of the wash cycle. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Maytag top load washer error code HC (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Maytag's published guidance [1], rewritten for clarity.

Swap the hoses. Turn off the water supply and swap the hoses.
Verify. Run another cycle to confirm.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first

Frequently asked questions

What does error code HC mean on a Maytag top load washer?

Maytag lists HC as follows: The hot and cold inlet hoses are reversed. The code shows at the end of the wash cycle.

Is it safe to keep using the top load washer with HC?

Yes.

Can I fix Maytag top load washer error HC myself?

Only with the owner checks on this page, starting with: swap the hoses. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.

Sources

https://producthelp.maytag.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Top_Load_HE_Washers (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.