Maytag Top Load Washer Error Code lid: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Maytag top load washer error code lid means: The lid was left open. After 10 minutes the cycle resets and drains. [1] Keep using it? Yes. Start with the owner checks below, beginning with: close the lid.

Quick facts

Code	lid
Also shown as	None listed by the manufacturer
Brand / appliance	Maytag top load washer
System	Door / lock
Official meaning	The lid was left open. After 10 minutes the cycle resets and drains. [1]
Keep using it?	Yes
DIY-safe?	Owner checks only (listed below)
Support	Maytag Product Help (producthelp.maytag.com), 1-800-344-1274

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code lid means on a Maytag top load washer

The lid was left open. After 10 minutes the cycle resets and drains. [1]

This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Maytag top load washer error code lid (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Maytag's published guidance [1], rewritten for clarity.

Close the lid. Closing the lid clears the display.
Restart if drained. If it has drained, start the cycle again without adding more detergent.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Anything involving wiring, the control board, the motor or the water valve electrics
The appliance is under warranty: contact Maytag Product Help (producthelp.maytag.com), 1-800-344-1274 first

Frequently asked questions

What does error code lid mean on a Maytag top load washer?

Maytag lists lid as follows: The lid was left open. After 10 minutes the cycle resets and drains.

Is it safe to keep using the top load washer with lid?

Yes.

Can I fix Maytag top load washer error lid myself?

Only with the owner checks on this page, starting with: close the lid. If it persists, call a technician or Maytag Product Help (producthelp.maytag.com), 1-800-344-1274.

Sources

https://producthelp.maytag.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Top_Load_HE_Washers (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Maytag.