Samsung Freestanding electric range Error Codes: Full List & Meanings

Every Samsung freestanding electric range error code in the Samsung freestanding electric range error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Samsung Support Center (samsung.com/us/support).

Codes by system

Heating

Door / lock

Control / electronics

All Samsung freestanding electric range error codes

Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.

Code	Meaning	System	Owner action
E27	Oven temperature sensor is defective (electrically open). The oven temperature sensor should measure around 1080 ohms at room temperature.	Heating	Service
E28	Oven temperature sensor is defective (electrically shorted). The oven temperature sensor should measure around 1080 ohms at room temperature.	Heating	Service
E-08	Oven not heating. The oven temperature sensor should measure around 1080 ohms at room temperature.	Heating	Owner checks
E-OA	Oven overheating. The oven temperature sensor should measure around 1080 ohms at room temperature.	Heating	Service
SE	Defective key on the control panel.	Control / electronics	Reset only
E-OE	Oven door lock error. Also: FL	Door / lock	Owner checks
LE	Low DC voltage error (below 9 volts DC).	Power supply	Service
E-54	Oven electronic control board communication error.	Control / electronics	Service
E-55	Oven electronic control board communication error with touch panel.	Control / electronics	Service
E-56	Cooktop has an error code.	Control / electronics	Owner checks
cE56	Internal oven electronic control board error.	Control / electronics	Reset only
to	Cooktop top temperature sensor error (sensor is electrically open).	Heating	Service
ts	Cooktop top temperature sensor error (sensor is electrically short).	Heating	Service
bo	Cooktop element inverter control board error. An inverter control board sensor is defective (these sensors monitor the inverter control boards that convert AC voltage to DC voltage for induction element heating). Also: bs	Heating	Service
ot	Cooktop over-temperature error.	Heating	Reset only
0	Pan detection error.	Control / electronics	Owner checks

Symptoms

Sources

Sears PartsDirect: Samsung freestanding electric range error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Samsung.