Samsung Freestanding electric range Error Code 0: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Samsung freestanding electric range error code 0 means: Pan detection error. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Samsung freestanding electric range error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | 0 |
|---|---|
| Also shown as | None listed by the manufacturer |
| Brand / appliance | Samsung freestanding electric range |
| System | Control / electronics |
| Meaning (service chart) | Pan detection error. [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Samsung Support Center (samsung.com/us/support) |
| Source document | Samsung freestanding electric range error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code 0 means on a Samsung freestanding electric range
Pan detection error. [1]
This is a control / electronics code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Samsung freestanding electric range error code 0 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (0) and copy the full model number from the rating label, so you can confirm this chart applies to your freestanding electric range and order the right parts.
- Check the cookware. Use the correct size of iron-containing cookware.
- Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
- Test and decide. Run a short cycle or restart and watch the display. If 0 comes back after these checks, stop using the range for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Samsung freestanding electric range error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Cookware for induction cooktops Water filters Find the perfect fit for your refrigerator. Try our water filter finder Most common symptoms to help you fix your ranges Choose a symptom to see related range repairs. View all Why isn't my range working? Main causes: power supply failure
- Blown thermal fuse
- Bad relay control board
- Damaged terminal block
- Wiring failure... Read more Why doesn't my range's oven broiler work? Main causes: broken broiler element
- Weak
- Broken broil burner igniter
- Control system failure
When to call a technician
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Samsung Support Center (samsung.com/us/support) first
Related error codes
Frequently asked questions
What does error code 0 mean on a Samsung freestanding electric range?
The Samsung freestanding electric range error-code chart lists 0 as follows: Pan detection error.
Is it safe to keep using the freestanding electric range with 0?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Samsung freestanding electric range error 0 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Samsung Support Center (samsung.com/us/support).
Sources
- Sears PartsDirect: Samsung freestanding electric range error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Samsung.