ErrorCodePro · Appliance Error Codes

Samsung Washer Error Code 4C: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Samsung washer error code 4C means: Water is not entering the washer correctly. [1] Keep using it? Not until the cause is fixed. Start with the owner checks below, beginning with: check the hoses.

Quick facts

Code4C
Also shown as4E, nF, 1 4C
Brand / applianceSamsung washer
SystemWater fill
Official meaningWater is not entering the washer correctly. [1]
Keep using it?Not until the cause is fixed
DIY-safe?Owner checks only (listed below)
SupportSamsung Support Center (samsung.com/us/support)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code 4C means on a Samsung washer

Water is not entering the washer correctly. [1]

This is a water fill code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Samsung washer error code 4C (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on Samsung's published guidance [1], rewritten for clarity.
  1. Check the hoses. Make sure hot goes to hot and cold to cold, and the hoses aren't bent or kinked. Samsung says not to use Flood Safe hoses.
  2. Open the valves. Open both water valves fully and leave them open while the washer runs.
  3. Check the drain hose. Make sure it isn't kinked and goes 6–8 in into the drain pipe.
  4. Reset. Unplug the washer or switch off its breaker for 1 minute, then try a cycle.
  5. Clean the inlet filters. Turn off the valves, disconnect the hoses and clean any debris from the inlet filters.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

No specific part is implied by the manufacturer's guidance for this code.

When to call a technician

Frequently asked questions

What does error code 4C mean on a Samsung washer?

Samsung lists 4C as follows: Water is not entering the washer correctly.

Is it safe to keep using the washer with 4C?

Not until the cause is fixed.

Can I fix Samsung washer error 4C myself?

Only with the owner checks on this page, starting with: check the hoses. If it persists, call a technician or Samsung Support Center (samsung.com/us/support).

Is 4E the same as 4C?

Yes. Samsung's documentation lists 4E, nF, 1 4C with the same meaning as 4C; the display format depends on the model.

Sources

  1. https://www.samsung.com/us/support/troubleshoot/TSG10000997/ (official)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Samsung.