ErrorCodePro · Appliance Error Codes

Samsung WaterWall dishwasher Error Code 7E: Meaning & How to Fix It

By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026

Samsung WaterWall dishwasher error code 7E means: Water wall vane motor error. [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.

Source: Samsung WaterWall dishwasher error-code chart, via Sears PartsDirect [1].

Quick facts

Code7E
Also shown asNone listed by the manufacturer
Brand / applianceSamsung WaterWall dishwasher
SystemMotor / drive
Meaning (service chart)Water wall vane motor error. [1]
Keep using it?Only if the owner checks below clear the code; if it returns, stop and book a repair
DIY-safe?Owner checks only (listed below)
SupportSamsung Support Center (samsung.com/us/support)
Source documentSamsung WaterWall dishwasher error-code chart (via Sears PartsDirect)

On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ

What error code 7E means on a Samsung WaterWall dishwasher

Water wall vane motor error. [1]

This is a motor / drive code. Codes and wording can vary by model, so check your owner's manual for your model number.

How to fix Samsung WaterWall dishwasher error code 7E (safe owner checks)

Safety first: disconnect power before you remove any panel or reach into the sump or drum. Do not touch wiring, the control board or the motor. If you see water near electrical parts, stop and call a technician. These steps are based on the Samsung WaterWall dishwasher error-code chart (via Sears PartsDirect) [1], rewritten for clarity.
  1. Write down the code and model number. Note exactly what the display shows (7E) and copy the full model number from the rating label, so you can confirm this chart applies to your waterWall dishwasher and order the right parts.
  2. Remove the packing tape on. Remove the packing tape on the water wall vane if not removed during installation.
  3. Do a power reset. Unplug the appliance or switch off its breaker for one minute, then restore power and try again. If the code clears and stays away, it may have been a one-off fault.
  4. Test and decide. Run a short cycle or restart and watch the display. If 7E comes back after these checks, stop using the dishwasher for this function and call a technician, because the remaining causes need meters or part replacement.

The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Samsung WaterWall dishwasher error-code chart published by Sears PartsDirect, rewritten for safe owner use.

Parts that may be involved

Exact parts depend on your model number. This page lists part types only, never part numbers.

When to call a technician

Frequently asked questions

What does error code 7E mean on a Samsung WaterWall dishwasher?

The Samsung WaterWall dishwasher error-code chart lists 7E as follows: Water wall vane motor error.

Is it safe to keep using the WaterWall dishwasher with 7E?

Only if the owner checks below clear the code; if it returns, stop and book a repair.

Can I fix Samsung WaterWall dishwasher error 7E myself?

Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Samsung Support Center (samsung.com/us/support).

Sources

  1. Sears PartsDirect: Samsung WaterWall dishwasher error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Samsung.