Whirlpool Range Error Codes: Full List & Meanings

Every Whirlpool range error code in the Whirlpool range error-code chart, as published by Sears PartsDirect, with its meaning. Codes vary by model, so confirm in your owner's manual. Support: Whirlpool: 1-866-698-2538.

Codes by system

Control / electronics

Door / lock

All Whirlpool range error codes

Codes marked "Reset only" or "Service" have no separate page because the manufacturer publishes no owner fix beyond a reset or a service call.

Code	Meaning	System	Owner action
F0	Default F code-no failure. The F0 code displays if there are no previous fault codes and you hold the CANCEL key for 5 seconds.	Control / electronics	Owner checks
F1	Defective electronic oven control (EOC).	Control / electronics	Reset only
F2	Keypad wire harness is disconnected. Also: E0	Control / electronics	Owner checks
F2/E5	Cancel key is defective. Also: F2/E6	Control / electronics	Owner checks
F3	Defective oven temperature sensor or open oven temperature sensor circuit. Also: E0	Heating	Reset only
F4	Meat probe shorted. Also: E1	Sensors	Reset only
F5	Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door). Also: E0	Door / lock	Owner checks

Symptoms

Sources

Sears PartsDirect: Whirlpool range error-code chart (third-party copy of manufacturer service data)

Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.