ErrorCodePro · Appliance Error CodesWhirlpool Range Error Code F5: Meaning & How to Fix It
By the ErrorCodePro Editorial Team · Last reviewed October 20, 2026
Whirlpool range error code F5 means: Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door). [1] Keep using it? Only if the owner checks below clear the code; if it returns, stop and book a repair. Start with the owner checks below, beginning with: write down the code and model number.
Source: Whirlpool range error-code chart, via Sears PartsDirect [1].
Quick facts
| Code | F5 |
|---|---|
| Also shown as | E0 |
| Brand / appliance | Whirlpool range |
| System | Door / lock |
| Meaning (service chart) | Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door). [1] |
| Keep using it? | Only if the owner checks below clear the code; if it returns, stop and book a repair |
| DIY-safe? | Owner checks only (listed below) |
| Support | Whirlpool: 1-866-698-2538 |
| Source document | Whirlpool range error-code chart (via Sears PartsDirect) |
On this page: Meaning · Steps · Parts · When to call a technician · Related codes · FAQ
What error code F5 means on a Whirlpool range
Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door). [1]
This is a door / lock code. Codes and wording can vary by model, so check your owner's manual for your model number.
How to fix Whirlpool range error code F5 (safe owner checks)
- Write down the code and model number. Note exactly what the display shows (F5) and copy the full model number from the rating label, so you can confirm this chart applies to your range and order the right parts.
- Close the door or lid fully. Open and close the oven door to see if the oven door switch turns the oven light on and off when the oven door is opened and closed.
- Do a power reset. Disconnect power or unplug the oven.
- Test and decide. Run a short cycle or restart and watch the display. If F5 comes back after these checks, stop using the range for this function and call a technician, because the remaining causes need meters or part replacement.
The first and last steps (and the power reset) are general owner checks added by ErrorCodePro; the rest follow the Whirlpool range error-code chart published by Sears PartsDirect, rewritten for safe owner use.
Parts that may be involved
Exact parts depend on your model number. This page lists part types only, never part numbers.
- Oven door switch
- Oven door lock assembly
- Wire harness
When to call a technician
- Technician: test the oven door switch operation using the oven light.
- If the oven door switch is defective, a technician should replace it.
- Reconnect any loose wires on the oven door lock assembly wire harness.
- Technician: replace the wire harness if damaged.
- Technician: check the door lock assembly for visible damage and replace it if broken.
- Anything involving wiring, the control board, the motor or the water valve electrics
- The appliance is under warranty: contact Whirlpool: 1-866-698-2538 first
Related error codes
Frequently asked questions
What does error code F5 mean on a Whirlpool range?
The Whirlpool range error-code chart lists F5 as follows: Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door).
Is it safe to keep using the range with F5?
Only if the owner checks below clear the code; if it returns, stop and book a repair.
Can I fix Whirlpool range error F5 myself?
Only with the owner checks on this page, starting with: write down the code and model number. If it persists, call a technician or Whirlpool: 1-866-698-2538.
Is E0 the same as F5?
Yes. The source chart lists E0 with the same meaning as F5; the display format depends on the model.
Sources
- Sears PartsDirect: Whirlpool range error-code chart (third-party copy of manufacturer service data)
Last reviewed: October 20, 2026. ErrorCodePro is not affiliated with Whirlpool.